XC90 L5-2.5L Turbo VIN 59 B5254T2 (2004)
Install expander 5777-1 and connecting rod 5777-2 (these are included in extractor 999 5777) on the puller cylinder.
Puller cylinder 999 5575 PULLER CYLINDER USED WITH HYDRAULIC PUMP -5576 See: Tools and Equipment/999 5575 Puller Cylinder Used
with Hydraulic Pump-5576 is used together with hydraulic pump 999 5576 HYDRAULIC PUMP See: Tools and Equipment/999 5576 Hydraulic Pump
(foot-operated). Alternatively tool 999 2615 Hydraulic pump See: Tools and Equipment/999 2615 Hydraulic Pump can be used, which consists of a
puller cylinder and a compressed-air driven hydraulic pump.
Removing the connecting socket
Place a container underneath the gearbox. Ensure that the piston rod in the puller cylinder is in the outer position.
Position sleeve 999 5777 Extractor See: Tools and Equipment/999 5777 Extractor between the puller cylinder and the transmission. Press in the
expander so that it enters the groove on the connecting sleeve.
Apply the puller cylinder. Check that the socket between the gearbox and the puller cylinder is in contact with its support surfaces.
Remove the socket.
Removing the sealing ring from the gearbox
Use a screwdriver to pry out the seal.
Position drift 999 5779 Drift See: Tools and Equipment/999 5779 Drift on the end of the differential to protect the sealing face from damage when
removing the seal. Do not damage the surfaces in the transmission housing.
Removing the sealing ring from the connecting socket
