XC90 AWD L5-2.5L Turbo VIN 59 B5254T2 (2005)
Tightening the propeller shaft CV joint
Use new screws.
Tighten the screws. See Tightening torque See: Automatic Transmission/Transaxle/Specifications/Mechanical Specifications/Tightening Torque.
For cars with a vibration damper on the Active on Demand Coupling flange
Use counterhold 951 2940 Counterhold See: Tools and Equipment/951 2940 Counterhold.
Installing members and the exhaust system
Tighten:
-
the 4 M8 screws for the support for the center bearing
-
the 2 M8 screws for the propeller shaft center bearing.
Install:
-
the front member on the bodywork, the exhaust pipe and the three-way catalytic converter (TWC), 4 x M8. Tighten
-
the brake pipe in the mountings in the member
-
the rear exhaust pipe assembly. Use a new gasket between the three-way catalytic converter (TWC) and the rear exhaust system.
