XC90 AWD L5-2.5L Turbo VIN 59 B5254T2 (2005)
Drive/Propeller Shaft: Service and Repair
Propeller Shaft
Propeller shaft, replacing
Special tools:
951 2928 Ball hex 6MM/3/8 See: Tools and Equipment/951 2928 Ball Hex 6mm/3/8
951 2940 Counterhold See: Tools and Equipment/951 2940 Counterhold
999 7057 Counterhold See: Tools and Equipment/999 7057 Counterhold
Note! Since the illustrations in this service information are used for different model years and/or models, some variation may occur. However,
the essential information is always correct.
Removal
Removing cross members
Remove:
-
the front cross member from the body. Remove the brake pipe from the mountings in the member
-
the rear cross member
-
the rear exhaust pipe. Support the front section of the exhaust pipe/three-way catalytic converter (TWC) so as not to put strain on the exhaust
manifold.
Pay attention to the following when removing propeller shaft
Note! Applies to 6-cylinder engines only.
Follow instructions. Refer to: Propeller shaft, special information See: Description and Operation
Removing the screws from the front propeller shaft
Remove the screws from the propeller shaft.
Use counterhold: 999 7057 Counterhold See: Tools and Equipment/999 7057 Counterhold.
Removing screws from the rear propeller shaft