XC90 FWD L6-3.2L VIN 98 B6324S (2007)
-
Secure the three cables (fiber optic, power and USB/iPod cables) in the existing cable harness using a cable tie.
Note! Observe caution, the fiber optic cable (1) is sensitive to bending and trapping. The bend radius must not be less than 25 mm.
Steps 20-26 apply to cars with Internal amplifier
Applies to cars with automatic gearbox
-
Turn the ignition key to position II.
Applies to all models
-
Move the gear selector lever to its rearmost position.
-
Use a weatherstrip and pry off the gear selector panel at the rear edge.
-
Press in the catches and remove the panel.