XC90 FWD L6-3.2L VIN 98 B6324S (2007)
-
Detach the left-hand headlamp by pulling up the two locking pins and then carefully pulling away the headlamp forwards.
-
Carefully prize up the catch on the connector for the headlamp using a screwdriver.
-
Pull the catch up completely, detach the connector and place the headlamp to one side.
Applicable for steps 12-17 is that the location of the above mentioned cable joints and junction connector is under the plate under the left-hand
headlamp.
Applies to cars with 8-cylinder engine where engine block heater is installed
-
Remove the tie strap securing the cable to the front socket. Pull the cable forward.