XC90 FWD L6-3.2L VIN 98 B6324S (2007)
-
the end mounting. See End mounting, replacing See: End Mounting, Replacing
-
one screw from the upper seat belt anchorage
-
one screw from the mounting for the seat belt (inertia) reel.
Unhook from the seat belt reel.
Remove the connector for the SRS ignition cable.
Thread the seat belt through the hole at the D-post panel and out through the hole in the side panel.
Installing rear seat belts (third row)
Note! For tightening torques, see See: Body and Frame/Specifications