XC90 FWD L6-3.2L VIN 98 B6324S (2007)
Thread the seat belt through the hole in the side post panel and out through the hole in the D-post panel.
Connect the connector to the SRS ignition cable.
Hook onto the seat belt reel.
Install:
-
1 screw for the seat belt reel. Tighten. See See: Body and Frame/Specifications
-
1 M10 screw for the upper mounting. Tighten
-
the end mounting. See End mounting, replacing See: End Mounting, Replacing
-
the seat belt cover
-
the cover for the side panel
-
the outer load floor.
Check the function of the seat belt. See Seat belt function, check See: Testing and Inspection.
Carry out a final inspection. See Supplementary restraint system (SRS), inspection See: Testing and Inspection.