Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


XC90 FWD L6-3.2L VIN 98 B6324S (2007)

Sensors and Switches > Sensors and Switches - Brakes and Traction Control > Braking Sensor/Switch > Component Information > Service and Repair > Pedal Position Sensor, Replacing > Page 2872

Page 3
background image

Note! Check that the snap ring is in position in the groove. Check that the ends of the snap ring lie against the stop lug.

Install:

-

The O-ring on the sensor

-

lubricate the O-ring lightly using a soap solution

-

the sensor for the power brake booster so that the locking lug goes into position.

Gently pull the sensor. Check that the sensor is secure.
Check that the snap ring is in position.
Connect the connector to the sensor.

Sensors and Switches > Sensors and Switches - Brakes and Traction Control > Braking Sensor/Switch > Component Information > Service and Repair > Pedal Position Sensor, Replacing > Page 2872

[PREV PAGE] [NEXT PAGE]