XC90 FWD L6-3.2L VIN 98 B6324S (2007)
Tighten, see: Tightening torque See: Specifications. Use protractor 951 2050 BEVEL PROTRACTOR See: Tools and Equipment/951 2050 Bevel
Protractor.
Install:
-
the anti-roll bar link to the spring strut. Use a new nut. Tighten. See: Tightening torque See: Specifications. Counterhold using a Torx wrench to
prevent damage to the boot.
-
The ABS sensor. Tighten to 10 Nm.
Note! Ensure that the ABS sensor seat in the stub axle is absolutely clean. Clean the ABS sensor with a soft brush.
Install:
-
the ABS sensor cable in the bracket.
-
the wheel. See Installing wheels See: Wheels and Tires/Wheels/Service and Repair.
Check and adjust the headlights' alignment according to: Headlamps, aligning See: Lighting and Horns/Headlamp/Adjustments