XC90 FWD L6-3.2L VIN 98 B6324S (2007)
Suspension Spring ( Coil / Leaf ): Service and Repair
Rear Suspension
Spring rear, replacing
Special tools:
999 5659 Tension caliper See: Tools and Equipment/999 5659 Tension Caliper
Note! As the illustrations in this service information are used for different model years and/or models, some variation may occur. However, the
essential information in the illustrations is always correct.
Removing the rear spring
Raise the vehicle.
Remove the wheels.
Install tensioner999 5659 Tension caliper See: Tools and Equipment/999 5659 Tension Caliper. See Tensioner 999 5659, User instructions See: Service
and Repair/User Instructions.
Press the tensioner up approximately 25 mm.
Remove the screw from the lower mounting for the shock absorber.
Press up the tensioner to the normal position.
Only cars with Bi-Xenon lamps
Remove the position sensor for Bi-Xenon lamps. See Position sensor Bi-Xenon lamps, replacing, TF-80SC AWD, AW50/51 AWD, M66 AWD See:
Lighting and Horns/Headlamp/Headlamp Alignment Sensor/Service and Repair.