XC90 FWD L6-3.2L VIN 98 B6324S (2007)
Remove:
-
the screw for the cross stay and wheel spindle. Release the stay and let it rest against the top of the wheel spindle.
-
- the screw of the longitudinal stay and the wheel spindle
-
the screw of the control arm and wheel spindle
Lower the control arm with the tensioner. The spring is now unloaded.
Lower the tensioner. Twist the tensioner so that it is positioned along the length of the car.
Press the control arm down by hand. Remove the spring.
Tightening torque
For tightening torques, see Specifications See: Specifications.
Installing the rear spring