Removal and Installation Removal | -
Disconnect the battery ground cable. | | -
Remove the lower air deflector (four screws). | | -
Disconnect and detach the loom. - Disconnect the two multiplugs.
- Detach the two loom fixing clips.
| | -
Support the radiator assembly and remove the right hand retaining bolts. | | -
Remove the left hand radiator retaining bolts. - Detach the multiplug fixing clips .
- Remove the retaining bolts.
| | -
Remove the radiator support bracket and the cooling fan/shroud. | | -
Remove the motor-fan from the radiator support bracket. | Installation | -
Refit the components in reverse order. | | |