Ford Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Hood Lock Cylinder >
< Liftgate Latch
Focus 1999 (08.1998-12.2004)
Mechanical Repairs
5 Body and Paint / 501 Body and Paint
501-14 Handles, Locks, Latches and Entry Systems
Description and Operation
Diagnosis and Testing
General Procedures
Removal and Installation
Exterior Door Handle
Handles, Locks, Latches and Entry Systems - Exterior Door Handle
Focus 1999 (08/1998-12/2004)
Removal and Installation
Removal
Remove the front door trim panel. For additional information, refer to SectionÂ
501-05 Interior Trim and Ornamentation
.
CAUTION:
Do not touch the adhesive surface as re-bonding will be impaired.
Peel back the watershield.
Remove the exterior door handle access hole grommet from the door.
NOTE:
The screw must be fully disengaged from the door lock cylinder bezel although it is not necessary to fully remove the screw.
Loosen the screw.
Remove the door lock cylinder bezel.
Remove the exterior door handle.
Slide the exterior door handle to release.
Remove the exterior door handle and gaskets.
Installation
To install, reverse the removal procedure.
Mechanical Repairs
5 Body and Paint / 501 Body and Paint
501-14 Handles, Locks, Latches and Entry Systems
Description and Operation
Diagnosis and Testing
General Procedures
Removal and Installation
Exterior Door Handle
Hood Lock Cylinder >
< Liftgate Latch