Ford Workshop Service and Repair Manuals

Loosen the coolant pump pulley retaining bolts.

Drain the cooling system. For additional information, refer to: Cooling System Draining, Filling and Bleeding (303-03A Engine Cooling - 1.4L Duratec-16V (Sigma)/1.6L Duratec-16V (Sigma), General Procedures).

Remove the accessory drive belt. For additional information, refer to: Accessory Drive Belt - 1.4L Duratec-16V (Sigma)/1.6L Duratec-16V (Sigma), Vehicles With: Air Conditioning (303-05A Accessory Drive, Removal and Installation) / Accessory Drive Belt - 1.4L Duratec-16V (Sigma)/1.6L Duratec-16V (Sigma), Vehicles Without: Air Conditioning (303-05A Accessory Drive, Removal and Installation).

lower the vehicle.

5. Remove the components in the order indicated in the following illustration(s) and table(s).

6. To install, reverse the removal procedure.

Removal Details

Item 4 : Coolant pump

CAUTION:Protect the timing belt and lower cover from contamination by the coolant.