Remove the wiper mounting arm and pivot shaft. For additional information, refer to: Wiper Mounting Arm and Pivot Shaft (501-16 Wipers and Washers, Removal and Installation).
NOTE:Make sure that the windshield wiper motor is in the park position.
Mark the position of the windshield wiper crank in relation to the wiper motor bracket to aid installation.
Remove the windshield wiper crank retaining nut.
Lift the wiper crank from the windshield wiper motor.
Remove the windshield wiper motor.
Installation
CAUTION:Move the windshield wiper motor to the park position before installing the windshield wiper motor.