| Removal and Installation Special Tool(s) | | Adapter for 205-066 205-066-02 | | | Installer, Crankshaft Rear Seal 303-440 | General Equipment Soft metal drift Wooden blocks Materials Name Specification Grease
WSD-M1C228-A Removal | | -
Remove the wheel hub.
For additional information, refer to: Wheel Hub (205-02B Wheel Hubs and Bearings - Full Floating Axle, Removal and Installation).
| | | -
NOTE:Support the wheel on suitable wooden blocks. Remove the wheel bearings - Remove the wheel hub dust cap.
- Remove the wheel hub seal.
- Remove the wheel bearing cones.
- Using a suitable soft metal drift, remove the outer wheel bearing cups.
- Remove the wheel bearing spacer.
| Installation | | -
CAUTION:Make sure the wheel bearing cup is fully seated. NOTE:Support the wheel hub on suitable wooden blocks. Using the special tool and a suitable press, install the wheel bearing cups. | | | -
Coat the inner wheel bearing cone with grease. | | | -
Install the inner wheel bearing cone. | | | -
CAUTION:Make sure the wheel hub seal is fully seated. Using the special tool, install the wheel hub seal. | | | -
Install the wheel hub dust cap. | | | -
Install the wheel bearing spacer. | | | -
Coat the outer wheel bearing cone with grease. | | | -
Install the outer wheel bearing cone. | | | -
Install the wheel hub.
For additional information, refer to: Wheel Hub (205-02B Wheel Hubs and Bearings - Full Floating Axle, Removal and Installation).
| | |
