Ford Workshop Service and Repair Manuals

Compressor, Valve Spring

303-060 (21-024)

Adapter for 303-060

303-060-05 (21-024-05)

Adapter for 303-060

303-060-07 (21-024-07)

Installer, Valve Stem Collets

303-362 (21-156)

1. Remove the valve cover.
   For additional information, refer to: Valve Cover (303-01C Engine - 2.4L Duratorq-TDCi (Puma) Diesel, In-vehicle Repair).
   

2. Remove the rocker carrier.

3. Loosen the valve collets.
   • Position a socket on the valve spring seat and gently strike it with a hammer.

4. Position the appropriate piston at top dead center (TDC).

5. Using the special tools, remove the valve collets.

6. Remove the valve springs.

1. Install the valve springs.

2. Using the special tools, install the valve collets.

3. Install the rocker carrier.
   • Tighten the bolts in two stages.
   • Stage1: 10 Nm
   • Stage 2: 30 degrees

4. Install the valve cover.
   For additional information, refer to: Valve Cover (303-01C Engine - 2.4L Duratorq-TDCi (Puma) Diesel, In-vehicle Repair).