Symptom | Possible Sources | Action |
Accelerator pedal is hard to press or has a rough/raspy or sticky feel | * Adjacent hardware, wiring harness(s), trim(s), carpet or mat(s) incorrectly installed | * CHECK the accelerator pedal and adjacent parts for correct installation. |
* Worn or damaged accelerator pedal | * INSTALL a new accelerator pedal. |
Accelerator pedal does not return freely | * Adjacent hardware, wiring harness(s), trim(s), carpet or mat(s) incorrectly installed | * CHECK the accelerator pedal and adjacent parts for correct installation. |
* Worn or damaged accelerator pedal | * INSTALL a new accelerator pedal. |
High engine idle speed | * Damaged accelerator pedal | * REFER to the WDS to diagnose the system. |
* Electronic throttle body | * REFER to the WDS to diagnose the system. |
* PCM calibration | * REFER to the WDS to diagnose the system. |
Poor idling | * Electronic throttle body | * REFER to the WDS to diagnose the system. |
* PCM calibration | * REFER to the WDS to diagnose the system. |