Freelander Service Procedures
AUTOMATIC GEARBOX - JATCO
44-32
REPAIRS
Hose - fluid cooler
$% 44.24.13
This procedure is identical for both feed and return
hoses.
Remove
1. Remove underbelly panel.
2. Position container to collect fluid spillage.
WARNING: Observe due care when draining
gearbox fluid as the fluid can be very hot.
3. Disconnect hose from fluid cooler and discard
'O' ring.
CAUTION: Always fit plugs to open
connections to prevent contamination.
4. Loosen union and remove hose from gearbox.
5. Remove and discard 'O' ring.
Refit
1. Wipe union and pipe ends using a lint free cloth.
2. Lubricate new 'O' ring with clean transmission
fluid and fit 'O' ring to hose.
LUBRICANTS AND SEALANTS,
Lubrication.
3. Position hose to fluid cooler but do not fully
tighten union.
4. Position hose to gearbox and tighten union to
18 Nm (13 lbf.ft).
5. Tighten fluid cooler hose union to 18 Nm (13
lbf.ft).
6. Top-up gearbox fluid level.
7. Fit underbelly panel.
8. Remove container.
M44 1639
