Freelander Service Procedures
AUTOMATIC GEARBOX - JATCO
REPAIRS
44-31
Fluid cooler - KV6
$% 44.24.10
Remove
1. Remove underbelly panel.
2. Position container to collect fluid spillage.
WARNING: Observe due care when draining
gearbox fluid as the fluid can be very hot.
3. Disconnect 2 fluid cooler hose unions and
discard 'O' rings.
CAUTION: Always fit plugs to open
connections to prevent contamination.
4. Position container to collect coolant spillage.
5. Release 2 clips and disconnect coolant hoses
from fluid cooler.
CAUTION: Always fit plugs to open
connections to prevent contamination.
6. Remove 2 bolts securing fluid cooler.
7. Remove fluid cooler.
Refit
1. Position fluid cooler to mounting bracket, fit
bolts and tighten to 25 Nm (18 lbf.ft).
2. Connect coolant hoses and secure with clips.
3. Lubricate new 'O' rings with clean transmission
fluid and fit 'O' rings to fluid cooler hoses.
LUBRICANTS AND SEALANTS,
Lubrication.
4. Connect hoses to fluid cooler and tighten
unions to 18 Nm (13 lbf.ft).
5. Refill cooling system.
COOLING SYSTEM - K SERIES KV6,
ADJUSTMENTS, Coolant - drain and refill.
6. Top-up gearbox fluid level.
7. Fit underbelly panel.
