Freelander Service Procedures
AUTOMATIC GEARBOX - JATCO
44-30
REPAIRS
Fluid cooler - Td4
$% 44.24.10
Remove
1. Disconnect battery earth lead.
2. Remove underbelly panel.
3. Position container to collect coolant spillage.
4. Release 2 clips and disconnect coolant hoses
from fluid cooler.
5. Position container to collect fluid spillage.
6. Disconnect 2 fluid cooler hose unions and
discard 'O' rings.
7. Remove 3 bolts securing fluid cooler bracket.
8. Remove fluid cooler.
Refit
1. Clean cooler mounting points.
2. Position fluid cooler to mounting, fit bolts,
tighten 2 bolts to 45 Nm (33 lbf.ft) and
remaining bolt to 25 Nm (18 lbf.ft).
3. Connect coolant hoses and secure with clips.
4. Lubricate new 'O' rings with clean transmission
fluid and fit to fluid cooler hoses.
5. Connect hoses to fluid cooler and tighten
unions to 18 Nm (13 lbf.ft).
6. Top-up gearbox fluid level.
7. Connect battery earth lead.
8. Refill cooling system.
ADJUSTMENTS, Coolant - drain and refill.
9. Fit underbelly panel.