Freelander Service Procedures
AUTOMATIC GEARBOX - JATCO
REPAIRS
44-9
Selector indicator - from 04MY
$% 44.15.10
Remove
1. Position gear selector lever in 'Neutral' and
remove gear selector knob.
WARNING: Gear knob will be released
suddenly, keep face clear of gear knob
during removal.
2. Working from forward edge, carefully release
spring clip securing gear selector indicator
assembly to centre console. Release 2
additional clips at the sides and slide assembly
forward.
3. Disconnect multiplug from hill descent switch.
4. Disconnect multiplug from gear selector
indicator module.
5. Remove gear selector indicator assembly.
Refit
1. Position gear selector indicator assembly to
centre console.
2. Connect 2 multiplugs.
3. Ensure LED display module is located on pegs.
4. Fit and secure gear selector indicator assembly
to centre console.
5. Fit gear selector knob.
CAUTION: Selector lever must be in 'Park'
before fitting knob, failure to comply may
result in damage to selector assembly.
M44 1992
M44 1993