Freelander Service Procedures
AUTOMATIC GEARBOX - JATCO
44-6
REPAIRS
Gear knob
$% 44.15.07
Remove
Pre 04MY illustrated, (04MY onward similar)
1. Pull gear knob upwards to disengage locating
tang from gear selector lever.
WARNING: Gear knob will be released
suddenly, keep face clear of gear knob
during removal.
Refit
1. Position gear knob to gear selector lever
engaging locating tang on knob with slot in
selector lever.
2. Push gear knob fully on to gear selector lever.
CAUTION: Selector lever must be in 'Park'
before fitting knob, failure to comply may
result in damage to selector assembly.