Fabia Mk1
Fuel filter - Summary of components |
The fuel flow direction is indicated with arrows on the hoses, on the preheating valve and on the fuel filter. |
1 - | Return-flow hose |
q | from the injection pump |
q | blue marking |
2 - | Intake hose |
q | to the injection pump |
q | white marking |
3 - | Retaining clip |
q | replace if damaged |
4 - | Preheating valve |
q | Fitting position: Arrow points to fuel tank |
q | if the filter is replaced remove retaining clip and preheating valve with the fuel lines connected |
q | Temperature below +15 °C: access to filter open |
q | Temperature above +31 °C: access to filter closed |
5 - | Return-flow hose |
q | to fuel tank |
q | blue marking |
6 - | Intake hose |
q | from fuel tank |
q | white marking |
7 - | Fuel filter |
q | fill with diesel fuel before fitting |
q | do not interchange connections |
q | replace if damaged |
q | removing and installing → Fig. |
8 - | Gasket |
q | replace if damaged |
9 - | Drain plug |
q | to ventilate remove the retaining clip of the preheating valve and remove preheating valve with the fuel lines connected |
q | release and drain approx. 0.1 litre fluid (catch) |
10 - | 25 Nm |
11 - | Support |
12 - | Plastic insert |
q | with holder Pos. 11 constitute a replacement part |