RL V6-3.7L (2009)
3. Release the lock washer (A), then remove the anchor bolt (B), spring washer (C), center seat belt (retractor anchor) (D), or center seat belt buckle
(buckle anchor), and seat belt buckle (E).
NOTE: The retractor anchor is shown; the center seat belt buckle anchor is similar.
4. Remove the rear seat-back. See: Body and Frame/Seats/Service and Repair/Rear Seat Removal/Installation
5. Remove the C-pillar trim from both sides. See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Pillar Trim/Interior
Trim Removal/Installation - C-Pillar Trim
6. Remove the rear shelf. See: Body and Frame/Interior Moulding / Trim/Rear Shelf/Service and Repair
7. Remove the retractor mounting ET screw (A) and the retractor bolt (B), then remove the rear seat belt (C) and retractor (D).
8. Remove the rear center seat belt protector (A).
