RL V6-3.7L (2009)
9. Install the seat belt and buckles in the reverse order of removal, and note these items:
-
Apply liquid thread lock to the anchor bolts before reinstallation.
-
Tighten the bolts by hand first, then tighten to specification with a torque wrench.
-
Check that the retractor locking mechanism functions as described. See: Testing and Inspection
-
Assemble the washers on the retractor bolt as shown.
-
Before installing the center anchor bolt, make sure there are no twists or kinks in the center belt.
-
Make sure the rear center ELR (emergency locking retractor) is pointing straight forward.
Retractor bolt installation