TL FWD V6-3.5L (2009)
Seat Belt: Service and Repair
Rear Seat Belt Replacement
Rear Seat Belt Replacement
NOTE: Check the rear seat belts for damage, See: Testing and Inspection and replace them if necessary.
Rear Seat Belt
1. Remove the rear seat cushion and the seat-back. See: Body and Frame/Seats/Service and Repair/Rear Seat Removal/Installation
2. Remove the lower anchor bolt (A).
3. Remove these items:
-
C-pillar trim, both sides See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Interior Trim Removal/Installation -
C-Pillar Trim
-
Rear shelf See: Body and Frame/Interior Moulding / Trim/Rear Shelf/Service and Repair
4. Remove the retractor mounting bolt (A) and the retractor bolt (B), then remove the rear seat belt (C) and the retractor (D).
5. Install the rear seat belt and retractor in the reverse order of removal, and note these items:
-
Check that the retractor locking mechanism functions. See: Testing and Inspection
-
Before installing the anchor bolt, make sure there are no twists or kinks in the rear seat belt.
Center Seat Belt and Seat Belt Buckles
1. Remove the rear seat cushion. See: Body and Frame/Seats/Service and Repair/Rear Seat Removal/Installation
2. Remove the center anchor bolts (A), then remove the right seat belt buckle (B), the center seat belt buckle (C), and the left seat belt buckle (D).
