ZDX V6-3.7L (2010)
9. Install the latch in the reverse order of removal, and note these items:
-
Before reinstalling the latch protector, clean the latch and latch protector surfaces with isopropyl alcohol where the new foam seals will be
attached.
-
After reinstalling the latch protector to the latch, attach the new foam seals to the protector and the latch.
-
Make sure the connector is plugged in properly.
-
The outer handle rod and the cables are connected securely.
-
Make sure the door handle operates properly.
-
When reinstalling the door panel, make sure the plastic cover on the door is installed properly.
-
Push the clip into place securely.