ZDX V6-3.7L (2010)
Rear Door Panel: Service and Repair
Rear Door Panel Removal/Installation
Rear Door Panel Removal/Installation
Special Tools Required
-
KTC Trim Tool Set SOJATP2014
-
Trim Pad Remover Snap-on A 177A or equivalent, commercially available
*Available through the Acura Tool and Equipment Program; call 888-424-6857
NOTE:
-
Take care not to scratch the door or the related parts.
-
Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.
1. Push on the bottom of the inner handle cap (A) while pushing on the upper hook (B) with the appropriate trim tool, then pull back the cap and
release the hooks (C) to remove it.
2. Remove the screws securing the inner handle (A).
3. Release the hooks (A), then pull away the pull pocket topcoat (B), and remove the screw.
