ZDX V6-3.7L (2010)
6. While holding the door panel (A) away from the door, disconnect the power window switch connector (B) and courtesy light connector (C), and
detach the harness clips (D). If equipped, disconnect the inner handle light connector (E), and detach the harness clip (F).
NOTE: If you are only removing the door panel, go to step 15. If you are doing further disassembly of the door panel, continue to step 7.
Inner handle removal
7. Disconnect the inner handle cable (A) and the latch cable (B) from the inner handle (C), then remove the handle.
1. Release the inner handle cable fasteners (D, E), then disconnect the inner handle cable.
2. Release the latch cable fastener (F), and remove the latch cable fastener (G) from the inner handle by pinching its tabs together.
NOTE: If the cable fasteners are damaged or stress-whitened, replace them with new ones.
Inner handle case removal