ZDX V6-3.7L (2010)
15. Install the door panel in the reverse order of removal, and note these items:
-
If the clips are damaged or stress-whitened, replace them with new ones.
-
Replace any damaged cable fasteners with new ones.
-
The latch cable (A) should be fixed to the cable fastener (B) with the latch in the unlocked position as shown.
-
Make sure that each connector is plugged in properly.
-
The cables are connected securely.
-
Make sure the power window and the power door lock operate properly.
-
When reinstalling the door panel, make sure the plastic cover on the door is installed properly.
-
Push the clips and the hooks into place securely.