ZDX V6-3.7L (2010)
Rear Door Panel: Service and Repair
Rear Door Sash Inner Trim Replacement
Rear Door Sash Inner Trim Replacement
NOTE: Take care not to scratch the door.
1. Remove the door panel See: Rear Door Panel Removal/Installation.
2. Lower the glass fully.
3. Remove the rear door sash inner trim (A).
1. Detach the clips fastening the trim.
2. Pull back along the outside edge of the trim to release the hook strip (B) from the door glass opening flange at the B-pillar area of the door
sash.
3. Pull back along the outside edge of the trim to release the hook strips (C) from the door glass opening flange at the roof area and the quarter
glass area of the door sash.
4. If necessary, remove the grommets (D) from the door panel.
4. Install the trim in the reverse order of removal, and note these items:
-
If the clips are damaged or stress-whitened, replace them with new ones.
-
Push the clips and the hook strips into place securely.