ZDX V6-3.7L (2010)
9. Reinstall the A-pillar trim (A).
1. Insert the bottom of the trim into the dashboard (B), then reconnect the tweeter connector (C).
2. Place the trim over the A-pillar (D) and fit its upper clip (E) and the clip into the holes in the A-pillar, then lightly push the trim into place.
NOTE:
-
Make sure the side curtain airbag is not tucked under the clips or the trim ribs.
-
Do not push too hard on the A-pillar trim. If you push too hard, the clip will be damaged, and it will not hold the trim properly.
-
Gently tug on the A-pillar trim to verify that all clips are securely fastened.
10. Reinstall the front door opening seal.
B-Pillar Upper/Lower Trim