Bonnet lid - square

Operation 7025A10 · Bonnet lid

1.9 JTD 16V

Refer to op. 7025A12 Engine front sound insulation COVER - R.R.

Refer to op. 7025A14 Bonnet LID - R.R.

All versions

Lift the bonnet lid.

1. If necessary, adjust the buffer blocks.

2. If necessary, adjust the lock position. Refer to op. 7025A34 bonnet lid lock (one) - r+r or repair.

1. If necessary, undo the hinge bolts and adjust the bonnet position. The arrows indicate possible movements.

Tighten the hinge bolts.

If the adjustments described above are insufficient, adjust bonnet lid hinge position as described below.

Refer to op. 7055B64 Engine compartment DUST shield in front wheel arch (one), left or right - R.R. (right and left).

Refer to op. 7055B42 Additional FRONT WHEEL ARCH (one), left or right - R.R. (right and left).

1. Remove the soundproofing.

2. Slacken the nuts (2a) securing the hinges (2b) and adjust the position until the bonnet is aligned. The arrows (2c) indicate the possible movements.

3. Tighten the nuts.

Touch up the paintwork in the hinge area.

Fit the soundproofing in position.

Refer to op. 7055B42 Additional FRONT WHEEL ARCH (one), left or right - R.R. (right and left).

Refer to op. 7055B64 Engine compartment DUST shield in front wheel arch (one), left or right - R.R. (right and left).

1.9 JTD 16V

Refer to op. 7025A14 Bonnet LID - R.R.

Refer to op. 7025A12 Engine front sound insulation COVER - R.R.