Engine front sound insulation COVER - R.R.

Operation 7025A12 · Bonnet lid

1.9 JTD 16V

Removing

Open the bonnet lid.

1. Using a coin, rotate the front cover (1b) retainers (1a) until they are released.

2. Lift up the front section of the cover (2a) until the retainers (2b) are released from the rear cover (2c).

3. Remove the engine compartment front cover.

Refitting

Check that the front cover is not damaged.

Fit the front cover in place engaging the retainers with the rear cover.

Using a coin, secure the front cover rotating the retainers until they are engaged.

Reclose the bonnet lid.