Stripping FRONT BUMPER

Operation 7205E10 · Exterior parts

Removing

- 7055A40 radiator shield - r r

- 7055A41 RIGHT FRONT GRILLE - R.R. (right and left)

- 7055B26 cover (one) on bumpers - r+r

- 7055B32 protective moulding on front bumper (1), lh or rh - r r (right and left)

- 5550C30 l/h or r/h front turn signal (one) - r+r

1. Disconnect the front direction indicator wiring from the retainers, then remove.

Refitting

Check that the removed parts are undamaged.

Posiiton the front direction indicator wiring and secure to the retainers.

- 5550C30 l/h or r/h front turn signal (one) - r+r

- 7055B32 protective moulding on front bumper (1), lh or rh - r r (right and left)

- 7055B26 cover (one) on bumpers - r+r

- 7055A41 RIGHT FRONT GRILLE - R.R. (right and left)

- 7055A40 radiator shield - r r

GTA

Removing

- 7055A40 radiator shield - r r

- 7055A41 RIGHT FRONT GRILLE - R.R. (right and left)

- 7055B26 cover (one) on bumpers - r+r

- 5550C30 l/h or r/h front turn signal (one) - r+r (right and left)

- 5050D10 headlamp washer jet/s - r+r with bumpers removed (right and left)

- 5050D13 headlamp washer system types and fittings - r r (only the section on the bumper)

1. Disconnect the front direction indicator wiring from the retainers, then remove.

Refitting

Check that the removed parts are undamaged.

Posiiton the front direction indicator wiring and secure to the retainers.

- 5050D13 headlamp washer system types and fittings - r r (only the section on the bumper)

- 5050D10 headlamp washer jet/s - r+r with bumpers removed (right and left)

- 5550C30 l/h or r/h front turn signal (one) - r+r (right and left)

- 7055B26 cover (one) on bumpers - r+r

- 7055A41 RIGHT FRONT GRILLE - R.R. (right and left)

- 7055A40 radiator shield - r r