Cover (one) on bumpers - r+r
- Make
- Alfa Romeo
- Model
- 147 Factory Service Manual
- Year
- 2000–2004
- Section
- Moulding and protection › Cover (one) on bumpers - r+r
Body fittingsCover (one) on bumpers - r+r
Cover (one) on bumpers - r+r
Removing
1. Remove the cover (1a) using a thin flat screwdriver inserted in the relevant slot (1b).
Take care not to damage the bumper surface.
2. Disengage the retainer from the hole and save the cover.
Refitting
Check that the cover is undamaged.
Fit the retainer in the hole.
Fit the cover in its seating.
Parts & tools for this job For 2000 Alfa Romeo 147
- TOOLTrim removal tool kitSearch: trim removal tool kit
- PARTTouch-up paintSearch: Alfa Romeo touch up paint
- PARTPanel clip assortmentSearch: Alfa Romeo panel clips assortment
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.