Rear ornament - r r

Operation 7055A80 · Exterior mouldings

Removing

1. Turn crest (1a) and prise out both plugs (1b) protecting the retaining bolts.

2. Use a drift to unscrew both self-tapping screws (2a) securing crest (2b) and remove.

1. Disengage the lock barrel retaining clip.

2. Insert the key in the lock barrel and remove.

Refitting

Check that the lock barrel and the crest are not damaged.

Fit the retaining spring into its seat.

Fit the lock barrel into its seat until the groove engages with the retaining clips.

Fit the crest assembly and secure using two new self-tapping screws.

Fit the protective caps for the bolts.

Test the lock barrel to ensure it works properly.