Workshop Manuals Factory service & repair Alfa Romeo
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Alfa Romeo 147 Factory Service Manual (2000-2004)17 · Body fittings
17 · Body & interior

Windscreen base TRIM - R.R.

Make
Alfa Romeo
Model
147 Factory Service Manual
Year
2000–2004
Section
Moulding and protection › Windscreen base TRIM - R.R.
Body fittingsWindscreen base TRIM - R.R.

Windscreen base TRIM - R.R.

Operation 7055A18 · Exterior mouldings

Removing

- 5050B34 windscreen wiper arm/s complete with blade - r+r (left and right sides)

1. Remove the covers.

2. Unscrew the bolts

3. Release the inner retainers using the special tool.

NameCountry
3Scraper blade1.823.015.000

4. Remove left trim (4a) followed by right trim (4b).

Windscreen base TRIM - R.R.

Refitting

Check that the trim is undamaged.

Fit right trim, then left trim and do up the inner retainers.

Tighten the bolts and fit the covers.

- 5050B34 windscreen wiper arm/s complete with blade - r+r (left and right sides)

Parts & tools for this job For 2000 Alfa Romeo 147

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.