Workshop Manuals Factory service & repair Alfa Romeo
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Alfa Romeo 147 Factory Service Manual (2000-2004)17 · Body fittings
17 · Body & interior

BADGE on boot lid - R.R.

Make
Alfa Romeo
Model
147 Factory Service Manual
Year
2000–2004
Section
Moulding and protection › BADGE on boot lid - R.R.
Body fittingsBADGE on boot lid - R.R.

BADGE on boot lid - R.R.

Operation 7055A81 · Exterior mouldings

Removing

- 7015A04 tailgate interior panel - r+r

1. Working from inside the tailgate, undo the badge fixing nut.

BADGE on boot lid - R.R.

1. Remove the badge (1a) from the outside of the tailgate, releasing the centering pins (1b).

BADGE on boot lid - R.R.

Refitting

Check that the crest is undamaged.

Place the badge in position, attaching the centering pins.

Tighten the badge fixing nut.

- 7015A04 tailgate interior panel - r+r

Parts & tools for this job For 2000 Alfa Romeo 147

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.