Crest on hub cap plates - r r

Operation 7055A86 · Exterior mouldings

Removing

If the car has alloy rims, proceed as follows.

1. Using a screwdriver, prise off the crest (1a) disengaging the retainers (1b).

If the car has steel rims, proceed as follows.

1. Prise off the wheel hub.

1. Disengage the crest's inner lugs, then remove the crest.

Refitting

Check that the crest is undamaged.

Fit the crest in its seating and engage the inner lugs; fit the wheel hub (for cars with steel rims).

Fit the crest in its seating and engage the retainers (for cars with alloy rims).