Exhaust pipe heat shield - r r

Operation 1076A40 · Exhaust pipe fastenings and protections

1.6 TS

Removing

Position the vehicle on the ramp.

Proceed with the removal - 1076B26 intermediate exhaust silencer - r+r emission control versions.

1. Remove the rear exhaust silencer releasing it from the flexible mountings.

1. Undo the nuts (1a) and the bolt (1b) and remov the exhaust pipe front heat shield (1c).

1. Release the handbrake cable from the mounting bracket.

2. Remove the retaining springs (2a) and remove the intermediate heat shield (2b).

1. Remove the retaining springs (1a) and remove the rear heat shield (1b).

Refitting

Place the rear heat shield back in its housing and secure it using the retaining springs.

Place the intermediate heat shield back in its housing and secure it using the retaining springs.

Fasten the handbrake cable to the mounting bracket.

Place the exhaust pipe front heat shield back in its housing and secure it using the nuts and the bolt.

Place the rear exhaust silencer back in its housing securing it to the flexible mountings.

Proceed with the refitting - 1076B26 intermediate exhaust silencer - r+r emission control versions.

Remove the car from the ramp.

2.0 TS

Removing

Position the vehicle on the ramp.

Proceed with the removal - 1076B26 intermediate exhaust silencer - r+r emission control versions.

1. Remove the rear exhaust silencer, releasing it from the flexible mountings.

1. Undo the nuts (1a) and the bolt (1b) and remove the exhaust pipe front heat shield (1c).

1. Release the handbrake cable from the mounting bracket.

2. Remove the retaining springs (2a) and remove the intermediate heat shield (2b).

1. Remove the retaining springs (1a) and remove the rear heat shield (1b).

Refitting

Place the rear heat shield back in its housing and fasten it using the retaining springs.

Place the intermediate heat shield back in its housing and fasten it using the retaining springs.

Fasten the handbrake cable to the mounting bracket.

Place the front heat shield for the exhaust pipe back in its housing and fasten it using the nuts and the bolt.

Place the rear exhaust silencer back in its housing securing it to the flexible mountings.

Proceed with the refitting - 1076B26 intermediate exhaust silencer - r+r emission control versions.

Remove the car from the ramp.

1.9 JTD 8V

Removing

Position the vehicle on the ramp.

Proceed with the removal - 1076B26 intermediate exhaust silencer - r+r emission control versions.

1. Remove the rear exhaust silencer, releasing it from the flexible mountings.

1. Undo the nuts (1a) and the bolt (1b) and remove the exhaust pipe front heat shield (1c).

1. Release the handbrake cable from the mounting bracket.

2. Remove the retaining springs (2a) and remove the intermediate heat shield (2b).

1. Remove the retaining springs (1a) and remove the rear heat shield (1b).

Refitting

Place the rear heat shield back in its housing and fasten it using the retaining springs.

Place the intermediate heat shield back in its housing and fasten it using the retaining springs.

Fasten the handbrake cable to the mounting bracket.

Place the front heat shield for the exhaust pipe back in its housing and fasten it using the nuts and the bolt.

Place the rear exhaust silencer back in its housing securing it to the flexible mountings.

Proceed with the refitting - 1076B26 intermediate exhaust silencer - r+r emission control versions.

Remove the car from the ramp.

1.9 JTD 16V

Removing

Position the vehicle on the ramp.

Proceed with removal - 1076B18 rigid section of exhaust pipe between catalytic converter and silencer - r + r.

1. Remove the rear exhaust silencer, releasing it from the flexible mountings.

1. Undo the nuts (1a) and the bolt (1b) and remove the exhaust pipe front heat shield (1c).

1. Release the handbrake cable from the mounting bracket.

2. Release the retaining clips (2a) and remove the intermediate heat shield for the exhaust pipe (2b).

1. Release the retaining clips (1a) and remove the rear heat shield for the exhaust pipe (1b).

Refitting

Place the rear heat shield for the exhaust pipe back in its housing and secure it using the retaining clips.

Place the intermediate heat shield for the exhaust pipe back in its housing and secure it using the retaining clips.

Fasten the handbrake cable to the mounting bracket.

Place the front heat shield for the exhaust pipe back in its housing and fasten it using the bolt and the nuts.

Place the rear exhaust silencer back in its housing securing it to the flexible mountings.

Proceed with refitting - 1076B18 rigid section of exhaust pipe between catalytic converter and silencer - r + r.

Remove the car from the ramps.