Cruise control recall control not working
- Make
- Alfa Romeo
- Model
- 147 Factory Service Manual
- Year
- 2000–2004
- Section
- Engine › Cruise control recall control not working
‹ Prev Cruise control not working under any conditionsNext › Cruise control set+ control not working
Fault diagnosisCruise control recall control not working
CRUISE CONTROL RECALL CONTROL NOT WORKING
After deactivating the Cruise Control system by pressing the brake/clutch pedal, using the 'RESUME button on the Cruise Control, the speed set previously is not restored.
| Results of the tests | ||||
| 1 | CHECK ON RESUME COMMAND | All OK | Problems met | Operation |
|---|---|---|---|---|
| Check that the Cruise Control contacts work properly in the RESUME position | Continue to Step 2 | Lack of continuity | Replace stalk unit lever with built-in Cruise Control system control Op. 5580A10 | |
| 2 | CHECK CONNECTIONS TO ENGINE MANAGEMENT CONTROL UNIT | All OK | Problems met | Operation |
| With the ignition and Cruise Control knob set to 'ON and 'RESUME, check that there is a voltage signal from the Cruise Control system control to the engine management control unit: See E5060 CRUISE CONTROL | Continue to Step 3 | No voltage found | Restore the connections: See E5060 CRUISE CONTROL | |
| 3 | CHECK ON CORRECT OPERATION | All OK | Problems met | Operation |
| Check that the fault is no longer present | The fault persists: control unit faulty | Replace the engine management control unit Op. 1056B82 Search for the fault starting from another symptom' | ||
‹ Prev Cruise control not working under any conditionsNext › Cruise control set+ control not working
Parts & tools for this job For 2000 Alfa Romeo 147
- PARTEngine gasket setSearch: Alfa Romeo 147 2000 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.