Clutch noisy
- Make
- Alfa Romeo
- Model
- 147 Factory Service Manual
- Year
- 2000–2004
- Section
- Noisy / vibrations › Clutch noisy
Fault diagnosisClutch noisy
CLUTCH NOISY
When the clutch pedal is operated there is a noise (creaking)
| Results of the tests | ||||
| 0 | FIRST CHECK | All OK | Problems met | Operation |
|---|---|---|---|---|
With the engine idling and the gear lever in neutral, press the clutch pedal. Then, with the engine running and the handbrake applied, engage first gear and release the clutch | Continue to Step 1 | The noise disappears with the clutch pressed | See table S01 ENGINE KNOCK | |
| The noise disappears/increases with the clutch pressed | Continue to Step 1 | |||
| 1 | CHECK THRUST BEARING | All OK | Problems met | Operation |
| Check the thrust bearing: it should not be worn | Continue to Step 2 | Bearing fault | Replace the bearing Op. 1820A30 | |
| 2 | CLUTCH CHECK | All OK | Problems met | Operation |
| Check the condition of the clutch plate and springs. | Continue to Step 3 | Clutch plate or springs faulty | Replace the clutch plate Op. 1810A20 | |
| No fault found, but defect persists | See table S20 GEARBOX DIFFERENTIAL UNIT NOISY/ | |||
| 3 | CHECK ON CORRECT OPERATION | All OK | Problems met | Operation |
| Check that the fault is no longer present | Fault persists | Search for the fault starting from another symptom' | ||
Parts & tools for this job For 2000 Alfa Romeo 147
- PARTClutch kitSearch: Alfa Romeo 147 2000 clutch kit
- TOOLClutch alignment toolSearch: clutch alignment tool
- FLUIDGear oilSearch: Alfa Romeo 147 manual gearbox oil
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.