Noise front / round bends
- Make
- Alfa Romeo
- Model
- 147 Factory Service Manual
- Year
- 2000–2004
- Section
- Noisy / vibrations › Noise front / round bends
‹ Prev Noise front / driving in a straight line on an even roadNext › Climate control system noisy / (in the engine compartment)
Fault diagnosisNoise front / round bends
NOISE FRONT / ROUND BENDS
With the vehicle driving, there is a constant noise from the front, especially when steering
| Results of the tests | ||||
| 1 | ROAD TEST | All OK | Problems met | Operation |
|---|---|---|---|---|
| Carry out a road test at low speed steering to the left and to the right | Continue to Step 2 | There is a 'grinding' noise which changes drastically when the steering angle changes | Replace the constant velocity joint on the side that the noise is coming from | |
| A 'turning' noise is heard | Overhaul the differential Op. 2110D10 | |||
| 2 | CHECK ON CORRECT OPERATION | All OK | Problems met | Operation |
| Check that the fault is no longer present | Fault persists | Search for the fault starting from another symptom' | ||
‹ Prev Noise front / driving in a straight line on an even roadNext › Climate control system noisy / (in the engine compartment)
Parts & tools for this job For 2000 Alfa Romeo 147
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Alfa Romeo 147
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.