Workshop Manuals Factory service & repair Alfa Romeo
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Alfa Romeo 147 Factory Service Manual (2000-2004)22 · Fault diagnosis
22 · Diagnostics

Cd changer not working

Make
Alfa Romeo
Model
147 Factory Service Manual
Year
2000–2004
Section
RADIO AND ACCESSORIES etc.. › Cd changer not working
Fault diagnosisCd changer not working

CD CHANGER NOT WORKING

The CD-Changer is supplied and operated directly by the Connect radio module

Results of the tests
0PRELIMINARY CHECKAll OKProblems metOperation

Check that the fault does not stem from incorrect use.

Check that the buttons are working on versions with controls on the steering wheel.

Continue to Step 1CD not correctly positionedRestore the correct position.
CD not correctly positionedRestore the operation of the holder.
CD not correctly positionedSee table N70 CONTROLS ON THE STEERING WHEEL NOT WORKING
1CHECKING ELECTRICAL EQUIPMENTAll OKProblems metOperation
Remove the CD-Changer from its housing. Check for a positive supply at the connector coming from the radio and an earth at the CD-Changer See E3510 RADIOContinue to Step 2No supply (battery positive) and/or earth at the CD-Changer faultyContinue to Step 3
2CHECKING ELECTRICAL EQUIPMENTAll OKProblems metOperation
With the CD-Changer removed from its housing. Check for signals, at the radio connector, enabling the reading of the music discs in the CD Changer. See E3510 RADIO See Test 5580PH Check on operation of CD changer and radio moduleContinue to Step 4No signals enabling reading of music discs in the CD-Changer.Continue to Step 3
3CHECKING ELECTRICAL EQUIPMENTAll OKProblems metOperation

Check the following in order at the disconnected CD-Changer connector:

Continue to Step 4No signals enabling reading of music discs in the CD-Changer.Replace the Connect
Wiring between CD Changer and radio faulty.Renew the electrical connection. See E3510 RADIO
CD Changer faulty.Replace the CD Changer. Op. 5580M32
4CHECKING ELECTRICAL EQUIPMENTAll OKProblems metOperation
With the radio removed from its housing. Check for audio signals, at the radio connector, coming from the CD Changer. See Test 5580PH Check on operation of CD changer and radio moduleContinue to Step 6No audio signals from the CD Changer.Continue to Step 5
5CHECKING ELECTRICAL EQUIPMENTAll OKProblems metOperation

Check the following, in order, with the CD-Changer disconnected:

  • Continuity/insulation of the wiring between the radio and the Cd Changer.
  • Presence of music disc audio signals. See E3510 RADIO
Continue to Step 6CD Changer faulty.Replace the CD Changer. Op. 5580M32
Wiring between CD Changer and radio faulty.Renew the electrical connection. See E3510 RADIO
6CHECK ON CORRECT OPERATIONAll OKProblems metOperation
Check that the fault is no longer presentEnd of diagnosisFault persistsReplace the Connect

Parts & tools for this job For 2000 Alfa Romeo 147

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.