Workshop Manuals Factory service & repair Alfa Romeo
Alfa Romeo 147 Factory Service Manual (2000-2004)22 · Fault diagnosis
22 · Diagnostics

Connect not working

Make
Alfa Romeo
Model
147 Factory Service Manual
Year
2000–2004
Section
RADIO AND ACCESSORIES etc.. › Connect not working
Fault diagnosisConnect not working

CONNECT NOT WORKING

Results of the tests
0PRELIMINARY CHECKAll OKProblems metOperation
Check whether the Connect works when the on switch is operated or the key is turned to the ON positionContinue to Step 5It does not work when the key is turned to the ON position and/or the on button is operatedContinue to Step 1
1CHECK ON FUSEAll OKProblems metOperation
Check the condition of the supply fuse, controlled by the ignition and/or the direct supply fuse See E4091 CONNECTContinue to Step 2Fuse brokenRepair short circuits and then replace the fuse See E4091 CONNECT
2CHECKING ELECTRICAL EQUIPMENTAll OKProblems metOperation
Check the continuity of the wiring between the battery and the fuse. See E4091 CONNECTContinue to Step 3Wiring brokenRenew the wiring. See E4091 CONNECT
3CHECKING ELECTRICAL EQUIPMENTAll OKProblems metOperation
Check the continuity of the wiring between the fuse and the connectors fitted on the Connect. See E4091 CONNECTContinue to Step 4Wiring brokenRenew the wiring. See E4091 CONNECT
4CHECKING ELECTRICAL EQUIPMENTAll OKProblems metOperation
Check the condition of the Connect supply fuse. See E4091 CONNECTContinue to Step 5Fuse brokenRepair short circuits and then replace the fuse
5CHECK ON CORRECT OPERATIONAll OKProblems metOperation
Check that the Info Telematic Node is working properly.End of diagnosisFault persistsReplace the Connect module Op. 5580P20

Parts & tools for this job For 2000 Alfa Romeo 147

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.