Workshop Manuals Factory service & repair Alfa Romeo
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Alfa Romeo 147 Factory Service Manual (2000-2004)22 · Fault diagnosis
22 · Diagnostics

Drift whilst braking

Make
Alfa Romeo
Model
147 Factory Service Manual
Year
2000–2004
Section
STEERING – vehicle behaviour › Drift whilst braking
Fault diagnosisDrift whilst braking

DRIFT WHILST BRAKING

During braking, the car pulls to the right and/or left

Results of the tests
0PRELIMINARY CHECKSAll OKProblems metOperation
Check that the brake pedal is not too softContinue to Step 1Brake pedal too softSee table F10 EXCESSIVE BRAKE PEDAL FREE PLAY
1CHECK FOR FLUID LEAKSAll OKProblems metOperation

Check that there are no fluid leaks from:

  • calipers
  • master cylinder - condition of braking system
Continue to Step 2Fluid leak from a front caliperReplace the faulty caliper Op. 3310A30
Fluid leak from a rear caliperReplace the faulty caliper Op. 3310B36
2CHECK ON BRAKE WEARAll OKProblems metOperation
Check the state of wear of the brakes - condition of brake surfacesContinue to Step 3Brakes very wornOverhaul the brakes
Discs vitrified or with traces of greaseClean and check for causes
3CHECK WHEEL GEOMETRYAll OKProblems metOperation
Check the geometry and track of the wheel axleContinue to Step 4Front wheel geometry outside limitsRestore the correct front wheel geometry Op. 4450A10
Rear wheel geometry incorrectRestore the correct rear wheel geometry Op. 4450A40
4CHECKING WITH DIAGNOSTIC EQUIPMENTAll OKProblems metOperation

Connect diagnostic equipment (Examiner or other instruments) to the diagnostic socket.

Check that there are no faults in the ABS control unit

Continue to Step 5An error is detected in the control unitContinue following the instructions for the diagnostic equipment
Lack of dialogue with the control unitRestore the connection between the engine management control unit and the diagnostic connector See E7020 ABS
5CHECK ON DRIFTAll OKProblems metOperation

Disconnect the ABS control unit.

Check whether the vehicle still drifts during braking at variable speeds

Continue to Step 6Vehicle does not drift during braking

Replace ABS control unit Op. 3340A12

Note: Carry out filling with the diagnostic instrument in active diagnosis

6CHECK ON CORRECT OPERATIONAll OKProblems metOperation

Test the vehicle before delivery to the customer, to check that the fault is no longer present.

The test is essential, as the braking system involves a safety feature of the car

Fault persistsSearch for the fault starting from another symptom'

Parts & tools for this job For 2000 Alfa Romeo 147

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.