1016 cylinder head/s – cylinder head
- Make
- Alfa Romeo
- Model
- 147 Factory Service Manual
- Year
- 2000–2004
- Section
- 10 engine › 1016 cylinder head/s – cylinder head
Manufacturing data and tolerances1016 cylinder head/s – cylinder head
1016 CYLINDER HEAD/S – CYLINDER HEAD
| Camshaft bearing diameter (mm) | Validity | 
| ||
|---|---|---|---|---|
| 26.045 ÷ 26.070 | 1.6 TS 2.0 TS | |||
| Combustion chamber minimum permissible height (mm) | Validity | 
| ||
| 12.8 ÷ 13.2 | 1.6 TS 2.0 TS | |||
| Combustion chamber volume (c.c.) | Validity | |||
1.6 TS 2.0 TS | ||||
| Cylinder head lower plane planarity (mm) | Validity | 
| ||
| 0.1 | 1.6 TS 2.0 TS 1.9 JTD 8V | |||
| Diameter of hydraulic tappet seats (mm) | Validity | 
| ||
| 33.000 ÷ 33.025 | 1.6 TS 2.0 TS | |||
| Flatness of bottom surface (mm) | Validity |
| ||
| 0.1 ± 0.05 | 1.9 JTD 16V | |||
| Flatness of bottom surface (mm) | Validity | |||
| 0.1 | 1.9 JTD 8V | |||
| Permissible minimum height (mm) | Validity | 
| ||
| 107.0 ± 0.05 | 1.9 JTD 16V | |||
| Permissible minimum height (mm) | Validity | |||
| 140.85 - 141.15 | 1.9 JTD 8V | |||
| Tappet casing housing diameter (mm) | Validity | 
| ||
| 37.000 - 37.025 | 1.9 JTD 8V | |||
| Camshaft bearing diameter (mm) | Validity | 
| ||
|---|---|---|---|---|
| 27.010 ÷ 27.036 | 3.2 V6 | |||
| Cylinder head lower plane planarity (mm) | Validity |
| ||
| < 0.1 | 3.2 V6 | |||
| Diameter of hydraulic tappet seats (mm) | Validity |
| ||
| 33.000 - 33.025 | 3.2 V6 | |||
| Minimum permitted cylinder head height (mm) | Validity |
| ||
| 134.85 ÷ 135.15 | 3.2 V6 | |||
| Valve guide bore diameter (mm) | Validity |
| ||
| 12.000 ÷ 12.018 | 3.2 V6 | |||
Parts & tools for this job For 2000 Alfa Romeo 147
- PARTEngine gasket setSearch: Alfa Romeo 147 2000 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.