Workshop Manuals Factory service & repair Alfa Romeo
01 General data and specifications02 Maintenance03 Diagnosis – checks04 Engine (1.6 and 2.0 Twin Spark)05 Clutch06 Gearbox (manual and Selespeed)07 Front axle08 Brakes, ABS and traction control09 Steering10 Suspension and wheels11 Heating, air conditioning and washers12 Electrical equipment13 Body14 Body panels and reinforcement15 Wiring diagrams16 Connectors and pin-outs17 Wiring harnesses18 Fault diagnosis19 Special tools
Alfa Romeo 147 Factory Service Manual (2000-2002)18 · Fault diagnosis
18 · Diagnostics

H10 Stiff steering (in both directions)

Make
Alfa Romeo
Model
147 Factory Service Manual
Year
2000–2002
Section
Steering – car handling › H10 Stiff steering (in both directions)
Fault diagnosisH10 Stiff steering (in both directions)

H10 Stiff steering (in both directions)

StepTest procedureResultAction
0PRELIMINARY CHECKS

tyre pressures

condition of tyres

wheel geometry

condition of dust excluders

oil level

OK

Move onto step 1

Pressure not correct
  • Restore

End of diagnosis

Pressure not correct
  • Replace

End of diagnosis

Pressure not correct
  • Restore

End of diagnosis

Pressure not correct
  • Replace

End of diagnosis

Pressure not correct
  • Restore

End of diagnosis

1CHECK STEERING COLUMN

Check the rotation of the steering column, disconnecting it from the steering box

OK

Move onto step 2

Steering column stiff
  • Overhaul or if necessary replace

End of diagnosis

2CHECK STIFFNESS

Identify the condition where the customer reports stiffness

OK

Move onto step 3

Stiffness on both sides

Move onto step 3

Stiffness on both sides
  • Replace the steering box

End of diagnosis

Stiffness on both sides

Move onto step 4

3CHECK STIFFNESS AS ENGINE SPEED VARIES

Check stiffness during idling and as engine speed increases

OK

Move onto step 4

The stiffness is obvious during idling, and reduces or disappears as the engine speed increases

Move onto step 5

The stiffness is constant as the engine speed varies
  • Replace the pump

End of diagnosis

4CHECK FILTER IN RESERVOIR

Slacken the reservoir cap (without removing it) and check with the engine idling whether fluid leaks from the reservoir

OK

Move onto step 5

Fluid leaks are observed
  • Replace the reservoir

End of diagnosis

Fluid leaks are observed
  • Replace the pump

End of diagnosis

5PIPE CHECK

Check all the pipes in the system for kinks

OK

Move onto step 6

Kinks are found
  • Replace the pipes

End of diagnosis

No kinks are found
  • Replace the pump

End of diagnosis

6CHECK ON CORRECT OPERATION

Check that the fault is no longer present

OK

Incorrect selection of diagnostic procedure

Fault persists

Incorrect selection of diagnostic procedure

Parts & tools for this job For 2000 Alfa Romeo 147

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.